File Password
BD Price 100 TK
Winmax W400 Mtk6572__s8_v50_jb3_w_sudy72_kk__4.4.2__ALPS.KK1.MP7.V1.22Dead Boot Solution Here 100% Tested
Download Link
Winmax W400 Mtk6572 W400_rv01_rc01 Dead Boot Solution Here 100% Tested
Download Link
Winmax W400 Mtk6572_s8_v41_jb3 Dead Boot Solution Here 100% Tested
Download Link
- W400 (3G)
- Android 4.4.2 Kit Kat
- 1.3 GHz Dual Core Processor
- RAM 512MB & ROM 4GB
- 4.0" FWVGA Display
- Rear- 2.0MP + Front -VGA
- 1500mAh Battery
- G+P Sensor
- Wi-Fi Enabled
- Free Flip Cover
- one years Warranty
How to Flash
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
No comments:
Post a Comment