SYMPHONY H60_XXX_V9_AS
SYMPHONY H60_XXX_V10 (SW improvement)
| Network Scope | 2G, 3G |
| Battery Type & Performance | Lithium-polymer 2300 mAh Stand-by: up to 10 days Talk-time: up to 10 hours |
| Body & Weight | 143 x 72.6 x 9.5 millimeter, 151 grams |
| Camera Factors (Back) | Flash light, HDR, face beauty, panorama mode, voice shot, smile shot, multi angle view |
| Camera Resolution (Back) | 8 Megapixel |
| Camera Resolution (Front) | 5 Megapixel |
| Colors Available | Black |
| Display Size & Resolution | 5.0 inches, HD 1280 × 720 pixels (294 ppi) |
| Display Type | IPS Touchscreen |
| Graphic Processing Unit (GPU) | Mali 400 MP2 |
| Memory Card Slot | MicroSD, up to 32 GB |
| Operating System | Android Lollipop v5.1 |
| Processor | Quad-Core, 1.3 GHz |
| RAM | 1 GB |
| ROM | 8 GB |
| Release Date | November 2015 |
| Sensors | G-sensor, accelerometer, light, proximity |
| SIM Card Type | Dual SIM (Micro SIM, dual stand-by) |
| USB | MicroUSB v2.0 |
| Video Recording | Full HD (1080p) |
| Wireless LAN | Yes |
| Other Features | - Bluetooth, GPS, A-GPS, MP3, MP4, Radio, GPRS, Edge, Multitouch, Loudspeaker, OTA |
How to Flash
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
No comments:
Post a Comment